Clean Air in Military Buildings:
Dust and other unwanted particles in the air are inescapable problems of having buildings in the desert or other dirty military environments. Opening a door to get in, a window for air, or any kind of ventilation is going to bring in unwanted dust and particles. Some activities cause more than others, but more often than not controlling that dust is a key need of any military facility. It seems like a simple fix to blow in clean air, however having clean air readily available all the time is no easy task, especially in a harsh environment such as the desert. Air Cleaning Blowers, LLC can provide that clean air in military buildings.
The Air Cleaning BlowerTM (ACB) was developed specifically to remove dust, pollen and other particles from the air in dusty and harsh environments while eliminating the need for filter maintenance due to clogging filters. After removing most kinds of desert and military dusts, including CBRNE particles, without using any filter elements or media, the ACBs blow out clean air into your buildings, hangars, warehouses, and other facilities, which exactly what is needed in this case.
Air Force SBIR Tech Warrior Participant Spotlight
No Filter Media:
Media filters remove contaminants from air and other gases by stopping and collecting them. As a result, they clog and need maintenance and, sooner or later, replacement. In addition, as they clog, media filters and air purifiers increasingly impede the flow of air. When they do, the blower has to work harder and consume more electricity or other power to maintain the same airflow and air pressure at the application. In contrast, because they do not trap debris, ACBs do not clog. Without clogging, the filter maintenance is almost eliminated, and, consequently, so is deferred maintenance. Perhaps more important, particularly to designers of the systems, when ACBs supply the air moving and air cleaning, they eliminate the fluctuations in airflow, air pressure and power consumption, which makes it much easier to predict and calculate the air-systems’ performances, and therefore, to design optimal systems.
Rugged, light-weight and self-contained, and easily transported, mounted and removed without training, and often by one person, ACBs can readily travel with troops. However, that same compact design can be scaled up to building size and still retain the ruggedness, relatively-light weight, and compactness versus other filter-blower systems. Civilian air conditioner manufacturers already integrate them into their air conditioners to reduce maintenance—and deferred maintenance. They can be designed to run on virtually any type of electricity, even direct current from vehicles. Therefore, they can bring improved comfort and health conditions, even in expeditionary activities.
Other Key Features:
Another key feature is that the ACBs can remove rain, mist and snow from the air, helping the air stay dryer and reducing the load on any air conditioning, refrigeration or dehumidifying equipment. In addition, because there is no filter media catching that rain or snow there is nothing that will become wet or freeze up and prevent the air from passing through.
ACBs also can pressurize the spaces so that air will flow out of the facilities and help prevent dusts and sand from blowing in. That same air pressure will help increase the number of changes of air per hour in the building, which will help reduce the concentration of airborne pathogens and other contaminants. Since they do not collect the debris, ACBs will not create dangerous hot spots in the filter media if there are CBRNE particles in the surrounding environment. Further: all ACBs can be adapted for use with virtually any explosive or flammable gas or dust, Division/Zone 1 or Division/Zone 2.
Our ACBs were tested independently at an internationally-recognized filter-testing laboratory to establish their effectiveness. The testing found that standard models remove up to 98%+ of the mass of dust and other particles from the air. The laboratory results show that they remove virtually all particles larger than 10 microns and about 40% of the particles down to 3 microns from the air. The smallest particles most people can see are about 50 microns. Models under development will consistently remove sub-micron contaminants as well.
Originally developed to work in harsh environments such as steel, mining and fertilizer plants, the Air Cleaning BlowerTM can help no matter what kind of facility you operate, or where. Our ACBs are so effective that they are being used today by the US Military in the Middle East to keep air conditioners cooling, even in sandstorms.
Removing dust and particles from the air to keep people and equipment clean
Keeping mist and humidity out of the air
Clean Air in Military Buildings
Remove dust and particles form the air for military personnel to breathe more easily
Eliminating the need for replacement filters in hard to access locations